Compur Ex plus Gas Detector User Manual download pdf (Page 12)

Setting Up Triple Plus+ and Triple Plus+ IR

III. Setting Up

The Triple Plus+/Plus+ IR has been designed to display as much or as little infor-

mation to the user as is required by the controller of the equipment. On the one

hand it is a four channel measuring instrument with continuous readout, on the

other, a basic alarm only detector with status display and no way of switching it

off. This section describes how to tailor the instrument to the application via the

front panel buttons. The section on Configuring the instrument with Portables

PC software details other adjustments that may be made to the instrument.

3.1 Using the Menu system

To access the SETUP menu press ‘CAL’ button. The screen will display the

following:

MENU EVENT LOG

<< >> QUIT LOG

The four buttons have above them a symbol or word: these are the ‘soft key’

functions currently assigned to that particular key. Use the ON and BACKLIGHT

buttons to scroll left and right, the CAL button to quit the menu system and

the UNMARKED button to select a menu option. View the road map on page

31 for details of Triple Plus+ configuration menu system.

The options available are:

MENU This selects the configuration menu. It is password protected, and

described below

EVENT This marks an event in the data log. There is no menu beneath this

option.

LOG This selects the log menu, described below.

How to enter the configuration Menu

Use the scroll buttons to select the MENU item and press the UNMARKED

button. The screen will display 'Password?' Press the buttons in the following

sequence within 5 seconds to enter the default password: ON, BACKLIGHT,

CAL and UNMARKED. This password can be changed via a PC using Portables

PC software.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Compur Ex plus Gas Detector User Manual Page 12